Multitech MT5634HD16 Guia do Utilizador descarregar pdf (Página 225)

CommPlete Communications Server 215

Intelligent Serial Interface (ISI)

When you select Intelligent Serial Interface (ISI) from the Communication Types

menu, the ISI Card Setup window appears. This window shows the base address,

IRQ level, and number of ports for each installed ISI card. To edit a card setup, select

the card and press E

NTER.

The Board Information window appears. This window shows the base address, IRQ

number, and number of ports for the selected modem card. To change one of these

options, select the field and type a new value.

Note: Setting the wrong base address and IRQ value can lead to unpredictable results.

Base Address

This is the base I/O address for the modem card in hexadecimal format. It provides

the RASExpress server with information about card activity, and allows the card to

use one interrupt for all ports on the card. Up to three modem cards can be used in a

RASExpress server. Each card must have a unique base I/O address number.

IRQ Number

This is the IRQ number for the modem card. The IRQ number used for each modem

card must be unique to the card. The IRQ requests the attention of RASExpress and

the computer’s microprocessor.

Number of Ports

This is the number of ports on the modem card.

Press E

SC to return to the ISI Card Setup window. To add a new card to this win-

dow, press I

NSERT and enter the base address, IRQ number, and number of ports in

the Board Information window.

To remove a modem card from the ISI Card Setup window, select the card and press

ELETE.

Line Information

To edit line information for an ISI card, select the card in the ISI Card Setup window

and press F2. The List of Lines window that appears lists the physical ports, or lines,

served by the RASExpress server. Select any line in the list and press

F2 to test it, or

NTER to configure it. The Line Information window that appears lists the parameters

that can be configured for the selected port. To edit a parameter, use the up and

down arrow keys to select the parameter, then press E

NTER and type the new value.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 291 292

Sem comentários

Multitech MT5634HD16 Guia do Utilizador Página 225