Multitech MT5634HD16 Guia do Utilizador descarregar pdf (Página 208)

RASExpress User Guide

198 CommPlete Communications Server

Auto Dialout Port Number

Type the TCP port number that is to be used for Telnet auto dialout.

Interface Type

Choose the Telnet interface type; the choices are Menu and Command. Menu mode

allows the RASExpress server to be configured using the menus in Chapter 3.

Command mode allows the RASExpress server to be configured using Telnet

commands (see Appendix C).

SNTP Client

Select SNTP Client from the Server Setup menu to open the SNTP Client

Configuration window.

The Simple Network Time Protocol (SNTP) is used to synchronize computer clocks in

the Internet. RASExpress uses SNTP time signals to synchronize server clocks for

accounting accuracy.

SNTP Client

Select Enable to enable the RASExpress server to synchronize its clock using SNTP

signals.

SNTP Server Address

Type the IP address of the SNTP server you want to use as a time source.

Time Zone

Type a one- to three-letter abbreviation for the time zone of the RASExpress server

that you are configuring. It is used for display purposes only.

Offset from UTC

Type the time difference between the location of the RASExpress server and the prime

meridian at Greenwich, U.K., in the format hours:minutes. Sites west of Greenwich

have negative numbers, and those east of Greenwich have positive numbers.

U.S. time zone Offset from UTC

Eastern Standard (EST) -05:00

Central Standard (CST) -06:00

Mountain Standard (MST) -07:00

Pacific Standard (PST) -08:00

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 291 292

Sem comentários

Multitech MT5634HD16 Guia do Utilizador Página 208