Part 1 – AT Commands for All Universal IP Devices
Universal IP AT Commands Reference Guide 41
#TCPTELNETMODE – Enable/Disable TCP Client Telnet Protocol
Description: Enables or disables the TCP Client Telnet protocol. Allows the TCP Client Telnet to handle a
minimal Telnet protocol.
This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Note: TCP Client raw mode requires the username and password each to be followed by a line
feed character not just any key.
Syntax: AT#TCPTELNETMODE=<parameter1>, <parameter2>
Values: parameter 1
1 TCP profile 1
2 TCP profile 2
parameter 2
0 Allow Telnet to connect, but ignore Telnet commands.
1 Enable TCP Client Telnet protocol function with username and password login
2 Enable TCP Client Telnet protocol function without username and password login
3 Enable TCP Client raw mode function with username and password login
Responses: \r\n#TCPTELNETMODE: VALUE1,VALUE2\r\n
\r\nOK\r\n
\r\nERROR\r\n
Examples: send: AT#TCPTELNETMODE=1,1\r
reply: \r\nOK\r\n
send: AT#TCPTELNETMODE=1\r
reply: \r\n#TCPTELNETMODE: 1,1\r\n
reply: \r\nOK\r\n
#TCPTELNETPW – Configure the TCP Client Telnet Protocol Login Password
Description: Configures the login password for the TCP Client Telnet protocol.
This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Syntax: AT#TCPTELNETPW=<parameter1>, <parameter2>
Values: parameter 1
1 TCP profile 1
2 TCP profile 2
parameter 2
64 character alphanumeric string
Responses: \r\n#TCPTELNETPW: VALUE1,VALUE2\r\n
\r\nOK\r\n
\r\nERROR\r\n
Examples: send: AT#TCPTELNETPW=1,"PASSWORD"\r
reply: \r\nOK\r\n
send: AT#TCPTELNETPW=1\r
reply: \r\n#TCPTELNETPW: 1,"PASSWORD"\r\n
reply: \r\nOK\r\n
Comentários a estes Manuais