Multitech MT64DSU Manual do Proprietário descarregar pdf (Página 23)

Chapter 3 - Testing

Local Loopback Test

This test allows you to test the local DTE and the local

MultiDSU64K. Use the following steps to perform the Local

Loopback Test.

1. Set DIP-Switch #8 to the UP position.

2. The front panel Test (TM) LED lights, and if you send data from

your DTE, it should be “looped back” to your DTE. If you have

access to a Bit Error Rate Tester, this can be used in place of

the DTE.

Figure 3-2. Local Loopback Test

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

Sem comentários

Multitech MT64DSU Manual do Proprietário Página 23