Multitech MT64DSU Manual do Proprietário descarregar pdf (Página 20)

MT64DSU Owner's Manual

Elastic Store Enabled = Switch #12 UP

Elastic Store Disabled = Switch #12 DOWN

(Factory Default Setting = DOWN)

Switch #13

This switch must be in the DOWN position.

Switch #14

Dedicated/Switched Line Operation

(Asynchronous/Synchronous Mode)

The MultiDSU64K works over either Dedicated or Switched lines.

Note you must have this switch positioned in Switched Line mode

(UP) in order to issue AT Commands.

Switched Line = Switch #14 UP

Dedicated Line = Switch #14 DOWN

(Factory Default Setting = DOWN)

Switch #15

DTR Forcing

(Asynchronous/Synchronous)

It is advisable to force DTR in order for the terminal to communicate

properly with the DSU in Command mode.

DTR Controlled by DTE = Switch #15 UP

DTR forced On = Switch #15 DOWN

(Factory Default Setting = DN)

Switch #16

This switch is not used (reserved for future use).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 65 66

Sem comentários

Multitech MT64DSU Manual do Proprietário Página 20