Multitech ISIHP-4U Guia do Utilizador descarregar pdf (Página 59)

Chapter 3 - Software Installation

21. Select the ISI-port-number value in the Configuration menu and press ENTER.

22. Type 3 and press ENTER.

23. Press Escape to back out to the Main Menu.

24. Highlight Select file to Program in the Main Menu and press ENTER.

25. Select the terminal adapter hex file needed for this ISI card. Then press ENTER.

26. Select Program Firmware in the Main Menu and press ENTER.

27. Wait until the programming of the terminal adapter is complete.

28. For ISIHP-4S/4U/4SD, repeat steps 22-27 two more times, typing 5 on the first repetition and typing 7 on

the second repetition.

29. Hit Escape to exit from FlashPro. (Select Yes when asked whether to “Save Changes to Disk?” Then

press ENTER.)

The terminal adapters on the ISI card are now updated with the new firmware.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 129 130

Sem comentários

Multitech ISIHP-4U Guia do Utilizador Página 59