Multitech MVPGK1 Guia do Utilizador descarregar pdf (Página 7)

Quick Start Guide

Mounting the Gatekeeper in a Rack

The Gatekeeper may be used as a desktop unit or mounted in

a standard 19-inch rack enclosure. When mounting it in a rack,

attach it securely with the four mounting screws included in

your Gatekeeper kit.

Caution: To prevent personal injury or damage to the unit,

two people should mount the Gatekeeper into a rack.

Note: For proper cooling, the unit must have at least one inch

of clearance behind it for air flow. Whether mounted in a rack

enclosure or as a desktop unit, it must have a minimum of one

inch between the back panel and any wall or barrier.

Cable Connections

The network interface card must be connected to the local area

network, the SBC board to a keyboard, monitor, and mouse,

and the power supply to AC power. Additionally, a printer

may be connected to the printer port. Connector locations are

shown in Fig. 1.

Note: Any cables connected to the Gatekeeper should be

shielded to reduce interference.

120

100M

LINK

ACT

Cover ScrewsCover

Network

Interface

Card

COM2

(DB9)

Printer

Port

(DB25)

SBC Back PanelPower Supply

Fig. 1. Gatekeeper back

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Multitech MVPGK1 Guia do Utilizador Página 7