Multitech MVPFXS-24 Guia do Utilizador descarregar pdf (Página 139)

MultiVOIP FXS User Guide Operation & Maintenance

139

12. To confirm that the TFTP server IP address was indeed changed to the value you want, type printenv at the mvp-boot>

prompt and then press Enter.

13. If necessary, you can also change the IP address of the voip

(which is the ipaddress field in the ARMBoot environment)

and the IP address of the network gateway

(which is the gatewayip field in the ARMBoot environment)

For ipaddr, type setenv ipaddr a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP server)

at the mvp-boot> prompt. Then press Enter.

For gatewayip, type setenv gatewayip a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP

server) at the mvp-boot> prompt. Then press Enter.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 164 165

Sem comentários

Multitech MVPFXS-24 Guia do Utilizador Página 139