Multitech MTPSR1-100 Manual de Instalação descarregar pdf (Página 10)

ProxyServer Installation Manual

ProxyServer Installation

Note: Before starting installation, if the serial connector of your

modem or ISDN TA has only 9 pins, obtain an appropriate serial

adapter or short cable to connect it to the 25-pin WAN connector

on your ProxyServer.

1. Attach the ProxyServer WAN port to the serial port on the back

of your modem or ISDN TA. Tighten both fasteners until the

ProxyServer is secure.

2. Connect a 10BaseT (RJ-45) cable from the ProxyServer LAN

port to your LAN hub.

3. Connect the power adapter to the power input jack on the back

of the ProxyServer, then connect the power adapter to a

grounded wall socket; note that the red (power) LED lights.

ProxyServer Configuration

Your ProxyServer can be configured very easily using the Proxy-

Server Utilities supplied on CD ROM. The ProxyServer utilities can

be installed on any Windows 95 or Windows NT client on the same

network as your ProxyServer. In the example shown below, the

ProxyServer can be configured from any of the four computers on

the LAN.

LAN

Win 95 Win 95 Win 95 Win NT

ProxyServer

Modem or

ISDN TA

ISP

Internet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Multitech MTPSR1-100 Manual de Instalação Página 10