Multitech MVP200 Guia do Utilizador descarregar pdf (Página 10)

MultiVOIP Quick Start Guide

3. Connect a network cable to the Ethernet 10BASE-T

connector on the back of the MultiVOIP. Connect the other

end of the cable to your network.

4. If you are connecting a station device such as an analog

telephone, a fax machine, or a Key Telephone System

(KTS) to your MultiVOIP, connect the smaller end of a

special adapter cable (supplied) to the Voice/Fax Channel

1 FXS connector on the back of the MultiVOIP and the

other end to the station device.

If you are connecting a PBX extension to your MultiVOIP,

connect the smaller end of a special adapter cable

(supplied) to the Voice/Fax Channel 1 FXO connector on

the back of the MultiVOIP and the other end to the PBX

extension.

If you are connecting an E&M trunk from a telephone

switch to your MultiVOIP, connect one end of an RJ-45

phone cord to the Voice/Fax Channel 1 E&M connector

on the back of the MultiVOIP and the other end to the

trunk.

If you are connecting to an E&M trunk, you need to ensure

that the E&M trunk jumper is in the correct position for the

E&M type trunk. The default E&M jumper position is E&M

type 2. To change the E&M jumper position, perform the

E&M jumper block positioning procedure, which

immediately follows this procedure.

5. Repeat the above step to connect the remaining telephone

equipment to each Voice/Fax Channel on your MultiVOIP.

6. Turn on power to the MultiVOIP by setting the power

switch on the back panel to the 1 (up, On) position. Wait

for the Boot LED on the MultiVOIP to go off before

proceeding. This may take a couple of minutes.

Proceed to the Software Loading section to load the MultiVOIP

software.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comentários a estes Manuais

Sem comentários

Modelos	Tipo de documento
FD-130AE	Manual de usuario Brickcom FD-100Ae, 32 paginas
FB-130AP	Manual de usuario Brickcom FB-130Ap, 88 paginas
FB-130NP	Manual de usuario Brickcom FB-130NP, 32 paginas
CB-102AE	Manual de usuario Brickcom CB-102AP surveillance camera, 96 paginas
FB-500AP	Manual de usuario Brickcom FB-300AP, 84 paginas
FD-130AP	Manual de usuario Brickcom FD-130Ap, 35 paginas
GOB-100AP	Manual de usuario Brickcom OB-100Ap, 41 paginas
CB-101AP V2.1	Manual de usuario Brickcom CB-101AP surveillance camera, 84 paginas

Multitech MVP200 Guia do Utilizador Página 10

Comentários a estes Manuais

Brickcom MB-500AP manuales

Brickcom MB-500AP Manual de usuario (28 paginas)

Tabla de contenidos

Más productos y manuales para Cámaras De Seguridad Brickcom

Multitech MVP200 Guia do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Multitech MVP200

Brickcom MB-500AP manuales

Brickcom MB-500AP Manual de usuario (28 paginas)

Tabla de contenidos

Más productos y manuales para Cámaras De Seguridad Brickcom