Multitech MultiModem DSVD MT5600DSVD Manual de Instruções descarregar pdf (Página 29)

i.LON SmartServer 2.0 Hardware Guide 19

Note: Pin 1 of the RS-232 console port can be attached to the carrier detect line of an external GSM

modem.

Connecting the Telephone Line Port

Safety Warning

The SmartServer’s telephone modem should only be used with telephone circuits

equipped with proper lightning and transient protection circuitry. This minimizes the risk

of shock or damage should lightning strike on or near a telephone circuit to which the

SmartServer is connected.

For SmartServer models 72102, which contain a 56K V.90 analog modem, you can connect the RJ-11

telephone line port. This enables the SmartServer to make dial-out connections to TCP/IP networks.

To connect the telephone line port on the SmartServer, you connect one end of a compatible two-wire

POTS line with a suitable male RJ-11 connector to the telephone line port on the SmartServer and then

connect the other end to a POTS line connection. Note that the SmartServer analog modem is not

compatible with ISDN circuits.

Caution

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord

Applying Power to the SmartServer

Once you have mounted the SmartServer, connected all the wiring, and closed the enclosure, you can

apply power to the SmartServer. The LEDs on the SmartServer will flash for several minutes as the

unit boots. Once the unit is powered and operational, the green Power/Wink LED will stay solid ON.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35

Sem comentários

Multitech MultiModem DSVD MT5600DSVD Manual de Instruções Página 29