Multitech MTCMR-E1 Guia do Utilizador descarregar pdf (Página 7)

MultiModem rCell Intelligent Wireless Router

Multi-Tech Systems, Inc. Quick Start Guide 7

Notes

The POWER LED. The POWER LED lights after power-up.

The Reset Button. Hold the Reset button in until the Status Light goes

out. Then release it. It also will set the username and password back to

admin and admin as well as setting the IP address to the default of

192.168.2.1.

Powering Down and Hardware Resetting a MTCBA-C1-EN2 Router

It is recommended to follow the following shutdown sequence, when

possible, prior to a hardware reset or turning off of power to the router.

The shutdown sequence informs the network that the mobile station is

going offline, and saves critical data to the module‘s non-volatile

memory (flash).

AT+CFUN=0 (issue this command)

+WIND:10 (Wait for this response from the modem)

Router is now ready to be powered off or reset.

If you do not see the +WIND:10 response, you may need to activate

the unsolicited message by using the command

AT+WUSLMSK=00020000,0

TCP/IP Address for Ethernet Functionality

1. Click Start | Settings | Control Panel. Double-click the Network

Connections icon.

2. The Network Connections screen displays. Right-click the Local

Area Connection icon and choose Properties from the drop down

list.

The Local Area Connection Properties dialog box displays.

● Select Internet Protocol [TCP/IP].

● Click the Properties button. The Internet Protocol (TCP/IP)

Properties screen displays.

Important Note:

If this screen opens and displays your current IP configuration, we

suggest you record this information for future reference (i.e., after

the router is configured, you may wish to return this PC to its

original settings).

● To set a Fixed IP Address for the PC, select Use the following

IP address.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sem comentários

Multitech MTCMR-E1 Guia do Utilizador Página 7