Multitech MTCBA-E-EN Guia do Utilizador descarregar pdf (Página 22)

Chapter 3 – Using your Wireless Modem

22 Multi-Tech Systems, Inc. MultiModem Cell User Guide

Generic Dial-Up Method - Non-Windows

1. If CDMA, dial onto the network using AT#777

2. If GPRS/EDGE:

a. To set up an Access Point Name (APN) enter:

AT+CGDCONT=1, “IP”,”<APNSERVER>”

Where <APNSERVER> is the APN server supplied by your carrier

b. dial onto the network using AT*99***1#

Serial Baud Rate

Your MultiModem Cell is defaulted to a serial baud rate of 115200 from the factory. To enjoy faster baud rates, you can

manually set the modem to a higher speed (230400, 460800, or 921600) using the AT+IPR=<baudspeed>. However, you

must make sure the host serial port is capable of the new speed. If the new speed is set and the host hardware is not capable

of the higher speed, you will need to find a host that is capable.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Sem comentários

Multitech MTCBA-E-EN Guia do Utilizador Página 22