Multitech MTA128ST-USB Guia do Utilizador descarregar pdf (Página 6)

Chapter 1 – Introduction and Description

Multi-Tech Systems, Inc. MTA128ST-USB External ISDN Terminal Adapter PN S000340 6

Assembling the MTA128ST-USB

The only assembly required is to mount the feet on the bottom of the unit. Peel the four self-

adhesive plastic feet off the backing strip and press them into the recesses on the bottom.

Connecting the MTA128ST-USB

Place the MTA128ST-USB terminal adapter in a convenient location. In a typical configuration,

you will need to connect your MTA128ST-USB to your computer’s USB port, to its own power

supply, to the ISDN network terminator, and to any optional analog equipment you are using

(e.g., a telephone).

MTA128ST-USB Connection

Connecting to Your Computer

1. Plug the 4-pin flat end (Type A) into a USB port connector on your computer or laptop.

Note: Do NOT plug the “D-shaped” end (Type B) of the USB cable into the USB

connector on the back panel of the MTA128ST-USB at this time. You will be directed to

make the connection during the software driver installation process.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Sem comentários

Multitech MTA128ST-USB Guia do Utilizador Página 6