Multitech MULTI MODEM II MT5600BA Manual do Utilizador descarregar pdf (Página 58)

4 AT Commands, S-Registers, and Result Codes

52

MultiModemII User Guide

S95 decimal 0–15 0 The bits in this register can be set to over-

ride some of the W command options. A bit

set to a 1 in this register enables the corre-

sponding result code regardless of the W

setting.

Bit 0 CONNECT result code indicates

DCE speed instead of DTE speed.

Bit 1 Append /ARQ to CONNECT XXX

result code in error-correction mode.

Bit 2 Enable CARRIER XXXX result code.

Bit 3 Enable PROTOCOL XXXX result code.

Bit 4 Reserved.

Bit 5 Enable COMPRESSION result code.

Bit 6 Reserved.

Bit 7 Reserved.

Register Unit Range Default Description

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 112 113

Comentários a estes Manuais

Sem comentários